Angle and Channel Cutting Attachment for Bend-Tech Dragon A400 CNC Pipe Cutter
Need to cut parts from Angle or Channel section?
No problem! The Angle and Channel attachment allows the Dragon A400 CNC Pipe Cutter to cut angle and channel, as well as round pipe and square/rectangular tube… in a variety of materials including steel, stainless-steel and aluminium.
How does the Angle and Channel CNC Cutting Attachment work?
On the standard A400 CNC pipe cutter, the rear chuck drives/rotates the material and the head/gate simply holds the material in position. This works perfectly for pipe and tube.
However, in the case of angle and channel section, these materials tend to twist which means that the gate has to be motorised (gear driven) and synchronised with the rear chuck.
The angle and channel attachment allows the standard A400 machine to be upgraded to a motorised gate, to allow it to cut angle and channel reliably and accurately.
Cutting angle steel with CNC Plasma – View now;
Get an instant quote
on the Dragon A400 CNC Pipe/Tube/Angle/Channel Cutter, from CNC Plasma Cutters Australia
More information on Dragon A400
View more details and videos, download pdf brochure
Can you cut angle iron with a CNC plasma cutter?
Many CNC pipe/tube cutters do not have the ability to process angle section. Because angle iron is prone to twisting, it must be properly supported to ensure accurate cutting. The Bend-Tech Dragon A400 machine is available with a special attachment to handle angle and channel section material.
Can you cut channel with a CNC plasma cutter?
Many CNC pipe/tube cutters do not have the ability to process channel section. Because channel is prone to twisting, it must be properly supported to ensure accurate cutting. The Bend-Tech Dragon A400 machine is available with a special attachment to handle angle and channel section material.
How does CNC angle cutter work?
Unlike most CNC pipe/tube cutters, CNC angle cutters drive/rotate the stock material at two synchronised points; the front gate/head close to the cutting torch and at the rear chuck. This prevents the angle from twisting and allows accurate cutting.